Chassis
Products 1-30 of 44
Products 1-30 of 44

Front wheel bearing mopedcar
SKU: 20.13.01
- Suitable for all brands
- Installation: front left and right
- 1 bearing required per wheel
In stock
Steering rack boot moped car
SKU: 34.11.01
- Protects steering rack from dirt
- Same for left and right
- Suitable for Ligier, Microcar, Aixam
In stock
PremiumBall joint Aixam / Grecav
SKU: 25.01.02
- Installation: left and right
- Premium Bonq quality
- Suitable for Aixam, Minauto and Grecav
In stock
Support arm rubber Aixam / Grecav
SKU: 21.13
- Mounting: front, rear
- Size: 10 x 26 x 25/30 mm
- 2 pieces needed per side
In stock
Gearbox support rubber Aixam
SKU: 21.08
In stock
Engine support rubber Aixam / Bellier
SKU: 21.08A
- Aixam, Minauto, Bellier
- Hardness: Soft 45/50 SH
- Thread size: M10
In stock
PremiumSteering ball joint Aixam (M14)
SKU: 25.10
- Suitable for Aixam 1997-2019
- M14 thread on the inside
- Premium quality
In stock
Rear wheel bearing 6005 mopedcar all brands
SKU: 20.13.05
- Dimensions: 25x47x12 mm
- Fitting: rear
- Aixam, Ligier, Microcar
In stock
Spring steering knuckle
SKU: L1008468IMI
In stock
Shock absorber front Aixam 1997-2013
SKU: 4K009IMI
- Suitable for front left and right
- Length: 36.5 cm
- Aixam models 1997-2010
In stock
Steering ball / ball joint cover
SKU: 25.06
In stock
Rubber steering gear coupling Aixam 1997-2010
SKU: 21.06
In stock
Steering ball joint Aixam (M14)
SKU: 25.10ECO
- Fits Aixam 1997-2019
- Outer tie rod end
- M14 inner thread
In stock
OriginalRear wheel bearing 6005 SKF
SKU: 20.12.05
- Dimensions: 25 x 47 x 12 mm
- Mounting: rear
- SKF quality
In stock
Engine / Gearbox Mount Right Aixam
SKU: 1H002IMI
48 in stock
OriginalEngine support Aixam front side 45SH 1K006A
SKU: 1K006A
37 in stock
OriginalFront wheel bearing SKF 6333 mopedcar
SKU: 20.12.01
- Original SKF bearing
- Dimensions 30x60x37 mm
- 1 bearing needed per wheel
33 in stock
OriginalClamp bracket headlight Aixam left
SKU: 8R063
26 in stock
OriginalGearbox support rubber Aixam
SKU: 1K006
19 in stock
Inner steering ball joint Microcar / Aixam / Chatenet / Ligier
SKU: 25.13
12 in stock
OriginalClamp bracket headlight Aixam right
SKU: 8R064
9 in stock
Engine / Gearbox Mount Aixam Flywheel Side
SKU: 1666725351IMI
- Engine: Kubota Z402 / Z482
- Mounting: flywheel side
- Aixam and Minauto
4 in stock
Support arm front Aixam
SKU: 4L005IMI
4 in stock
Headlight / bumper support Aixam 500.4
SKU: 7S317IMI
3 in stock
OriginalSpring steering knuckle
SKU: L1008468
3 in stock
OriginalSpring steering knuckle Aixam
SKU: 4G006
2 in stock
OriginalSupport arm front Aixam
SKU: 4L005
2 in stock
Subframe chassis Aixam 400.4 / 500.4
SKU: 7W312IMI
1 in stock
Steering knuckle left Aixam 1997-2010
SKU: 4K010IMI
1 in stock
OriginalMotor / gearbox support Aixam flywheel side
SKU: 1666725351
On request
Moped car chassis parts
The chassis forms the basis of your moped car and encompasses all structural parts that provide stable road holding, correct steering behaviour and a safe connection between the engine, suspension and bodywork. A well-maintained chassis is essential for driving safety, ride comfort and a long vehicle lifespan. Minicar-Parts supplies chassis parts for all well-known brands, including Aixam, Microcar, Ligier, Chatenet, JDM, Bellier, Grecav and Casalini.
Worn chassis parts can lead to reduced road holding, vibrations, steering play and uneven tyre wear. Knocking or ticking sounds when driving over bumps can also occur. Regular inspection of the suspension and steering parts contributes to optimum safety and ride comfort. The range includes parts from Bonq and SKF as reliable alternatives, as well as original parts from the relevant moped car brand.
Chassis subcategories
Within the chassis category, all parts are organised by type. Under shock absorbers you will find the dampers that absorb vibrations and impacts from the road for a comfortable driving experience. Under suspension you will find supporting arms, rubber supporting arms, steering knuckles, ball joints and wheel bearings for correct wheel guidance. Under steering parts you will find steering ball joints, steering house covers, steering houses and the steering wheel for precise and safe steering. Under frame you will find rear axles, engine cradles, frame tubes and bumper brackets as structural load-bearing parts. Under engine mount you will find the rubbers and brackets that attach the engine and other aggregates to the chassis with vibration damping.
For related parts, please refer to the categories wheels and brake system.
Expert advice and fast delivery
The specialists at Minicar-Parts are happy to help you find the right chassis part for your moped car, based on brand, model and model year. Thanks to a large stock, most parts are available for immediate dispatch, so you can get back on the road safely and quickly. Whether you are a private individual or a professional workshop, our team is ready to help with any question.
With the right chassis parts, your moped car drives stably, safely and comfortably, for every model and every brand.